Degree Apprenticeships Toolkit

We’ve pulled together a list of FAQs regarding degree and higher apprenticeships.

From 2015 onwards all new apprenticeship programmes have been required to be developed according to new mandatory Apprenticeship Standards.

The term Apprentice and Apprenticeship are moving to become protected titles, which means that it will be illegal to call any training programme an apprenticeship if it has not been developed and approved in accordance with these standards

The Apprenticeship is actually offered by the employer not the education/training provider (who simply provides one element of it as a subcontractor to the employer).  In order to offer apprenticeship training (and also to be eligible for funding) the apprenticeship offered by an employer must comply to this new set of national standards.

This lists both those standards which have been approved and are ready to be delivered, and those that are currently under development.   A first point for any organisation wishing to get involved in apprenticeships is to see whether a standards is already developed/under development in that occupation areas.

Where the Apprentice Standards have been approved, then any HEI wanting to deliver the education parts of it has no option but to design and deliver their provision in line with the existing Apprenticeship Standards.   In practise (and given that in Engineering at least, these will generally be linked to UK Spec) this may not be too restrictive.  The level at which the content is defined is typically not that prescriptive.  See for example these two examples of undergraduate and masters level degree apprenticeships

 

Any views, thoughts, and opinions expressed herein are solely that of the author(s) and do not necessarily reflect the views, opinions, policies, or position of the Engineering Professors’ Council or the Toolkit sponsors and supporters.

Degree Apprenticeships Toolkit

We’ve pulled together a list of FAQs regarding degree and higher apprenticeships.

The terminology around apprenticeships is somewhat complex – due to the wide range of types and levels of training and skills that they encompass, and the changing political landscape in which they sit

The first set of terminology used in apprenticeships relates to level.  Apprenticeships are described in terms of education levels (even where no educational qualification is included!), with apprenticeships currently offered from level 2 (GCSE equivalent) to levels 6 and 7 (degree and master’s degree respectively).  The different levels of apprenticeships are termed ‘intermediate’ apprenticeships at Level 2, ‘Advanced Apprenticeships’ at Level 3, ‘Higher Apprenticeships’ at levels 4 and above, and Degree Apprenticeships in the case of Apprenticeships at levels 6 and 7 which lead to an undergraduate or Master’s degree as part of the apprenticeship training. It should be noted that these ‘degree apprenticeships’ are the only apprenticeships which mandate an educational qualification within them.

Apprenticeships classified as providing training equivalent to Levels 4 and above but which do not lead to a Bachelors or Master’s degree are termed Higher Apprenticeships.  These include apprenticeships with no formal qualifications as well as Apprenticeships leading to qualifications such as HNC, HND and Foundation degree.  Again it is important to note that the educational qualification here is a means to an end (in terms of developing and demonstrating competence some of in the skills required for the apprenticeship) rather than the end in itself

One significant potential source of confusion is that there are still legacy apprenticeships being delivered /offered under the systems that predated the current apprenticeship model.    Particular care is needed to make the distinction between new ‘Apprentice Standards’ and old style ‘Apprentice Frameworks’ which were also known as ‘Modern Apprenticeships’.

The Apprenticeships ‘Frameworks’ and ‘Standards’ are essentially the documents that define the design and content of the two types of apprenticeships developed pre and post 2014 and are significantly different.

Confusingly some of the old framework documents use the term framework and standard interchangeably.   Given that the old style apprenticeships will still be around for some time it is useful to be aware of them, even if only to avoid getting them mixed up with the new style apprenticeships standards and trailblazers which are described in more detail under FAQ’s 5 and 6

These old Apprenticeship Frameworks are currently being phased out (last starters on the old style apprenticeships summer 2017) and superseded by the new ‘Apprenticeship Standards’.  (https://www.gov.uk/government/publications/removal-of-apprenticeship-frameworks ) but will still be in existence with apprentices on them for several years to come. Some useful sources of information on these legacy arrangements can be found at

 

Any views, thoughts, and opinions expressed herein are solely that of the author(s) and do not necessarily reflect the views, opinions, policies, or position of the Engineering Professors’ Council or the Toolkit sponsors and supporters.

Degree Apprenticeships Toolkit

We’ve pulled together a list of FAQs regarding degree and higher apprenticeships.

Although degree level qualifications have been offered as part of some apprenticeship programmes ( for example day release degree courses etc.) for many years, the term Degree Apprenticeship has recently been adopted to have a more tightly defined meaning, and requiring providers to follow a specific process to offer such awards.   Even in degree apprenticeships however the educational qualification represents only part of the apprenticeship process.

The government’s expectation of what constitutes a Degree Apprenticeship  can be found on pages 12-13 of ‘The Future of Apprenticeships in England, Guidance for Trailblazers – from standards to starts (December 2015)’ which states:

  1. If you are considering bidding to develop a standard which you believe may be at level 6 or 7, there is an opportunity to include a degree in it. Degree Apprenticeships bring together the best of higher and professional and technical education, and see apprentices achieving a full bachelor’s or master’s degree as part of their apprenticeship.
  2. They will involve employers, universities and professional bodies working in partnership, with apprentices employed throughout, spending part of their time at university (with flexibility as to how this is structured – e.g. via day release or block release) and part with their employer.
  3. Apprentices will complete a rigorous end-point assessment (EPA) which tests both the wider occupational competence and academic learning required for success in the relevant profession. The degree programme can be structured in one of two ways:

 

Any views, thoughts, and opinions expressed herein are solely that of the author(s) and do not necessarily reflect the views, opinions, policies, or position of the Engineering Professors’ Council or the Toolkit sponsors and supporters.

Degree Apprenticeships Toolkit

We’ve pulled together a list of FAQs regarding degree and higher apprenticeships.

An Apprenticeship can be defined as a full-time paid job, which incorporates a programme of structured on and off the job training meeting.

The government additionally defines that it must meet certain specific criteria regarding duration (12 months or more), training (min 280 hrs, of which at least 30% away from workplace), employed hours (min. 30hrs a week), wages, achievement of minimum standards of English and Mathematics, and compliance with national apprenticeship standards (previously frameworks)

It is important to understand that the government’s model for apprenticeships of all types is that they should be employer led and driven and with the training largely workplace delivered.  Indeed for most apprenticeships there is not even a requirement for an educational qualification to be included (although most do at least at the higher levels).  Consequently most of the government guidance is written from the context/perspective of the employer rather than the education provider who is essentially a supplier (of education/training services) to the employer in this model.

However there are some more HE specific sources of useful information – probably the most comprehensive is published by The University Vocational Awards Council, who in 2015 produced a document called “Apprenticeship, Higher Apprenticeship and Degree Apprenticeship – A Guide for HEIs”. http://www.uvac.ac.uk/wp-content/uploads/2015/03/UVAC-Apprenticeship-Guide-12th-March-2015.pdf

The HEFCE website also has a Policy Guide on Degree Apprenticeships (including information on funding opportunities for HEIS’) at:

UUK have also produced some information on degree apprenticeships, including a March 2016 report on their projected growth:

And a 2019 update:

The government also produced a fact sheet and “quick start guide” for HEI’s interested in delivering apprenticeships (for the year 2015-16).

It should also be noted that much of the above applies specifically to England, and that different arrangements may apply in Scotland, Wales and Northern Ireland

It is also worthwhile to note that the development of Higher and Degree Apprenticeships in Engineering is perhaps somewhat behind that in other areas, notably IT and Business, Finance and Law.  Some useful and transferable information can be found by looking at these.  For example:

 

Any views, thoughts, and opinions expressed herein are solely that of the author(s) and do not necessarily reflect the views, opinions, policies, or position of the Engineering Professors’ Council or the Toolkit sponsors and supporters.

Degree Apprenticeships Toolkit

We’ve pulled together a checklist of things for university departments to consider when proposing to get involved in degree apprenticeships.  It’s still evolving so please do contact us if you have experience or advice you would like to add.

 

HEFCE (September 2015). Higher and degree apprenticeships – a strategic overview for higher education providers.

UVAC (March 2016). Higher and Degree Apprenticeships

UCAS information on degree apprenticeships

 

Any views, thoughts, and opinions expressed herein are solely that of the author(s) and do not necessarily reflect the views, opinions, policies, or position of the Engineering Professors’ Council or the Toolkit sponsors and supporters.

Degree Apprenticeships Toolkit

We’ve pulled together a checklist of things for university departments to consider when proposing to get involved in degree apprenticeships.  It’s still evolving so please do contact us if you have experience or advice you would like to add.

 

Funding arrangements

There are two crucial differences in the funding arrangements for apprenticeships compared to conventional degree courses.  Firstly the body responsible for the funding is the Skills Funding Agency or SFA rather than HEFCE, and secondly with the contractual arrangements with the employer rather than the student as the primary customer (the university is essentially a contracted supplier of education services to the employer under the apprenticeship model).  The government also pays a contribution towards the cost to a pre-agreed maximum sum defined at the point of approval with the SFA.   These different funding mechanisms have a very different set of terminology and processes than those which universities are more commonly familiar.

An HEI needs to (or apply to) be included on the Skills Funding Agency’s Register of Training Organisations (ROTO).  SFA will announce when ROTO is open to new applicants.  In addition to inclusion on ROTO an HEI will until the introduction of the Apprenticeship levy need to secure an SFA ‘allocation’ to claim funding to deliver Degree Apprenticeships.  SFA has in the last 15 months run two procurement rounds opening ROTO to HEIs and inviting HEIs to apply for an allocation.  HEIs that are not on ROTO and do not have an allocation should prepare for forthcoming procurement rounds.   HEIs not on ROTO may also want to consider how they can deliver Higher and Degree Apprenticeships with an FEC that is on ROTO and has an allocation.

In summary, to deliver a higher apprenticeship an HEI must be either:

Any HEI who already holds an SFA funding agreement which contains an apprenticeships allocation can go ahead and deliver higher and degree apprenticeships.

For HEIs who do not hold an existing contract to deliver apprenticeships with the SFA, the SFA ran its first expression of interest (EOI) round for HEIs with a clear plan for higher and degree apprenticeship delivery as part of their offer to employers in March 2016; this complements the additional £13m which government allocated to further education institutions (FEIs) in late 2014 to expand their higher apprenticeship provision. Further information is available by registering on the SFA’s procurement portal.

https://www.gov.uk/guidance/skills-funding-register-for-opportunities-to-tender

HEIs may deliver the whole apprenticeship directly or, act as the lead apprenticeship provider, sharing the delivery by subcontracting with other HEIs or FEIs.

The SFA is also offering automatic entry onto the ROTO to HEIs meeting specific criteria.

  1. Those in receipt of direct public grants for HE.
  2. Those including institutes of the University of London.
  3. Those who have the right to award one or more types of UK degree
  4. Those who have not had any material concerns raised as part of the HEFCE process of financial risk assessment.

Funding

The standard undergraduate fee is ÂŁ9k per annum at present. This may of course be varied in the contract with the employer, by agreement. The employer is liable for the course fees (not the student/apprentice). HEFCE have also stated that the higher cost subject premium will be available for eligible subjects (as for standard degree programmes).

In the funding model under trial for apprenticeship standards during 2014 to 2015 and 2015 to 2016, the government contributes two-thirds of the total agreed price, up to a cap, with employers contributing the other third in cash, all paid to the lead provider in a payment schedule agreed with the employer.

Funding is quite different from standard degree programmes.  It is earned against actual activity.  All apprentices must have an Individual Learner Record (ILR) file. Payments are earned by the HEI by confirming through the apprentice’s ILR record that they have received the latest employer one-third payment against their agreed payment schedule. ILR completion triggers the government’s two-thirds payment.

Development funding

The Department for Business, Innovation and Skills has also recently announced the Degree Apprenticeship Development Fund. The fund will provide £8 million starting in academic year 2016/17 to help universities and colleges work with employers to develop new degree apprenticeships ready for delivery from academic year 2017/18. The Skills Funding Agency will receive a further £2 million to encourage more learners to take up degree apprenticeships. Queries about how to apply for funding can be sent to: degreeapprenticeships@hefce.ac.uk.

 

Any views, thoughts, and opinions expressed herein are solely that of the author(s) and do not necessarily reflect the views, opinions, policies, or position of the Engineering Professors’ Council or the Toolkit sponsors and supporters.

Degree Apprenticeships Toolkit

We’ve pulled together a checklist of things for university departments to consider when proposing to get involved in degree apprenticeships.  It’s still evolving so please do contact us if you have experience or advice you would like to add.

 

Schedules of teaching and learning need to be agreed. These can take various forms:

There may also be periods of study on employers’ premises and at other institutions. These again have to be agreed and contracted.

Methods of grading, assessment and feedback need to be agreed and these will then be adhered to, in order to satisfy the exam board and other university regulations. The structures of assessment (presentations, experiments, lab work, practicals, as well as essays and exams) have also to be integrated throughout the programmes.

Agreeing employer-led content is vital from the above points of view. In employer led content, the university is required to have a position of ‘internal external examiner’ and in some universities this may mean that designated employer staff are given the status of adjunct employee at the university in question.

Examining employer-led content and the means by which this is done has to be agreed and contracted. It is essential to recognise that this can lead to conflicts, where for example:

University staff will therefore need to remain in close contact and regularly visiting employers’ premises in order that neither of these positions occurs. Where there are disputes over standards, there needs to be an agreed means of arbitration and reconciliation of grades and work.

Student registration is an issue because of the UK UCAS regulations that govern undergraduate admissions to programmes at this level. This may have to be agreed as a formality; if students are not to apply via UCAS then an alternative is required, that is agreed and contracted. There may be disputes also over:

 

Any views, thoughts, and opinions expressed herein are solely that of the author(s) and do not necessarily reflect the views, opinions, policies, or position of the Engineering Professors’ Council or the Toolkit sponsors and supporters.

Degree Apprenticeships Toolkit

We’ve pulled together a checklist of things for university departments to consider when proposing to get involved in degree apprenticeships.  It’s still evolving so please do contact us if you have experience or advice you would like to add.

 

The length of contract will vary according to particular circumstances. It appears unlikely that any contract of less than 5-6 years is going to deliver the benefits sought by all. Universities need to have the stability. Employers do not want to give the impression that they are dipping into and out of the latest ideas. This kind of stability also informs the wider branding, confidence and substantive development that this initiative needs in the eyes of all concerned – and especially, as above, students and their advisors.

 

Any views, thoughts, and opinions expressed herein are solely that of the author(s) and do not necessarily reflect the views, opinions, policies, or position of the Engineering Professors’ Council or the Toolkit sponsors and supporters.

Degree Apprenticeships Toolkit

We’ve pulled together a checklist of things for university departments to consider when proposing to get involved in degree apprenticeships.  It’s still evolving so please do contact us if you have experience or advice you would like to add.

 

As for all new programme proposals, numbers of students required in order to make a programme viable is crucial. This needs to be clearly stated and written into the contracts that will be signed. This is vital anyway; but particularly vital when offering a degree apprenticeship programme that is formed around a number of employers, consortia, trade federations and SMEs. If for example the university contracts to run such a programme for 20 students and there are only 17/18/19, then this can lead to all sorts of debates and discussions – and conflicts – if for example every employer except one has delivered the numbers promised. This must be clearly understood, and must also be recognised and addressed as a key part of the contract.  Close co-operation between the lead academic department and the HEI’s finance and planning services will be needed and, as we said earlier, a very different approach taken to evaluating viability than for a standard academic programme.  The longer term and broader relationship to be developed with the company will need to be taken into account, for example, along with the opportunity to access a new funding source.

 

Any views, thoughts, and opinions expressed herein are solely that of the author(s) and do not necessarily reflect the views, opinions, policies, or position of the Engineering Professors’ Council or the Toolkit sponsors and supporters.

Degree Apprenticeships Toolkit

We’ve pulled together a checklist of things for university departments to consider when proposing to get involved in degree apprenticeships.  It’s still evolving so please do contact us if you have experience or advice you would like to add.

 

The constitution of the programme is formed around the 80/20 principle and what is done and how then becomes a matter for agreement in the contract. There are two main approaches:

The “on the job” work then has to be fitted in with the requirements of the employers, and needs to be agreed and structured in ways that fit in with HEI schemes of award. This means particular attention to, and agreement on:

Interim awards may also be either offered by the university or demanded by the employers, and the issuing of certificates and diplomas at different stages of progress may be required or appropriate in some cases.

 

Any views, thoughts, and opinions expressed herein are solely that of the author(s) and do not necessarily reflect the views, opinions, policies, or position of the Engineering Professors’ Council or the Toolkit sponsors and supporters.

Let us know what you think of our website